Apply Loads

8.  Apply convection loads on the exposed boundary lines.

Apply the convection to the lines of the solid model.  Loads applied to solid modeling entities are automatically transferred to the finite element model during solution.

1. Utility Menu:  Plot
        Lines
2. Main Menu:  Preprocessor
        Loads
             -Loads-Apply
                  -Thermal-Convection
                       On Lines
3. Pick the three lines that are exposed to ambient air

4. OK (in the picking menu)
5. Enter 0.014 for Film coefficient  -»
6. Enter 80 for Bulk temperature  -»
7. OK  -»

8. Toolbar:  SAVE_DB