10.  Move working plane and create second pin hole.

1. Utility Menu:  WorkPlane
        Offset WP to
             Global Origin
2. Main Menu:  Preprocessor
        -Modeling-Create
             -Areas-Circle
                  Solid Circle
3. Pick center point at WP X=0, WP Y=0 (in Graphics Window)
4. Move mouse to radius of .4 (shown in the picking menu) and click left mouse button to create circle
5. OK to close picking menu
6. Utility Menu:  WorkPlane
        Display Working Plane (toggle off)
7. Utility Menu:  Plot
        Replot

From this area plot, it appears that the upper, left-hand pin hole area is not there.  However, it is there (as indicated by the presence of its lines), it just can't be seen in the final display of the screen.  That is because the bracket area is drawn on top of it.  An easy way to see all areas is to plot the lines instead.

8. Utility Menu:  Plot
        Lines

9. Toolbar:  SAVE_DB